TEL:

Tel

+86-13325122131

HOME >> TECHNOLOGY >>Technical solutions >> How much do you know about the air flow control skills of the opening machine?
Details

How much do you know about the air flow control skills of the opening machine?

The opening machine is one of the indispensable equipment in the textile industry. It is mainly used to loosen the textile raw materials and remove impurities. It is a large-scale impurity removal machine. In the process of using the equipment, it is very important to control the air flow. As a professional manufacturer of flowering machine, xinjinlong analyzes the air flow control skills for you today.

12.jpg

The moving beater is equivalent to the impeller of the fan. Due to the continuous rotation of the beater, the gas is constantly discharged and replenished. In the beater's room, the volume and specific gravity of moving impurities and cotton lumps are different. The impurity volume is small, the ratio is large, the air flow resistance is small, and it is easy to fall from the dust bar gap after separation from the cotton block; while the cotton block is large in volume and small in specific gravity, the air flow has a large resistance to it, and the supporting function of the dust rod makes the cotton block not easy to drop. Even if some fibers fall out. When appropriate air flow is fed from the dust rubber chamber, it can return to the beating room with the air flow. Therefore, reasonable control of air flow is beneficial to improve the opening and cleaning effect of the machine, and the basic method is to adjust the air supply position and air volume.

In addition to the above opener, there are also a053a and B mixed flowering machines, which can replace the a006b, A034 and a016b equipment in the La series process, which is an effective machine integrating mixing, opening and removing impurities. In addition, there are fa101 type four taker in roller machine and fa061 dust collector. The former can obtain clean small cotton bundles, even reach the single fiber state, but have certain damage to the fiber, so the blending process should be explained in use. The latter is to use the mesh of dust cage to remove dust. Both of them are often used in the opening and filling process of rotor spinning.

The above content is the air flow control skills of the opener, I hope it can help you. If you want to know more about flowering machine knowledge, welcome to pay attention to our website dynamic, we will continue to push the relevant product content for you, looking forward to your consultation.

Copyright @ 2019 . All rights reserved.   备案号189716271273

contact information

Service call:133-2512-2131



Jinan xinjinlong Machinery Co., Ltd

  • Telephone

Technical Support: 卓博科技 | Admin Login